MC Modular floor-standing enclosures with solid door

EN 62208: IP66 IK10
UL508A – CSA C22.2 n°. 14-13
NEMA Type 1,12,4,4X

AISI 304 / WNr. 1.4301
On request: AISI 316 / WNr. 1.4404
Finish: Scotch-Brite
Thicknesses:
Door and rear panel: 1.5 mm
Roof and base: 1.5 mm
Side panels: 1.5 mm
Mounting plate: Galvanized steel
Thickness: 2.5 mm

Pitched perforated profile obtained from multiple bends, welded onto a dedicated micro-cast tripod support
Removable top and base made from bent and welded metal sheets

Concealed stainless steel AISI 316 hinges with opening angle over 120° (180° hinges available on request)
4-point rod locking system with ergonomic handle and 3 mm double-bit insert (on request: AISI 304 and alternative inserts)
A polyurethane gasket is applied along the perimeter (temperature range: -40°C to +90°C)
A tubular perforated profile provides door reinforcement and serves as a mounting base for accessories (from B600 mm width onwards)
Double-door version: Swing-lever locking system; the right-hand door is the primary leaf

Earthing accessories and cardboard packaging

Service for bayed enclosure assembly, custom drilling, and tailored solutions

Door with 180° opening
Internal plate: Side insertion with sliding guides
Side panels
Cable entry flanges: Blank or with guillotine system
Plinths: H 100 / 200 mm, with closed base and lifting feet
Rain protection roof
30° sloped roof
Inner door panel
Modular system